Archive - Boards & Upgrades for 3D Printers
Choose an alternative in the category
Boards & Upgrades for 3D Printers
20
Results
3D Printer Accessory - all-metal, resistant to temperatures up to 300 °C, fast heat dissipation, smooth and even printing, compatible with the most common filaments on the market (PLA, ABS, PETG, TPU, PP, PC, Nylon etc. ), dimensions 55 × 22 × 16 mm, weight 45.5 g
Discontinued
Order Code:
CREN230308
3D Printer Accessory - LED light, warm white light, energy-efficient, long service life, easy installation, length 290 mm
Discontinued
Order Code:
CREN230313
3D Printer Accessory - for the Creality CR-10 3D printer, CR-10S, Ender-2, Ender-3, Ender 5, Ender 5 Pro, Ender 5 Plus, high-speed prints 300 mm/s, all-metal, resistant to temperatures up to 300 °C, fast heat dissipation, smooth and even printing, compatible with the most common filaments on the market (PLA, ABS, PETG, TPU, PP, PC, Nylon etc. ), dimensions 66 × 22 × 23 mm, weight 61 g
Discontinued
Order Code:
CREN230306
3D Printer Accessory - replacement castors for V-Slot profile, material POM, outer diameter 24 mm, inner diameter 5 mm, height 11 mm
Discontinued
Order Code:
CREN230309
3D Printer Accessory - for Ender-3 Pro models, Ender-3, Ender-3 V2, Ender-3s, Ender-3 Max, Ender-2 Pro, Ender-2, titanium extruder and high temperature hotend, resistant to temperatures up to 300 °C, 300 mm/s high-speed printing support, simple installation and easy operation, quick filament change, compatible with TPU filaments, PLA, ABS, PETG, PC, PA, etc., weight 450 g
Discontinued
Order Code:
CREN230305
3D Printer Accessory - cooling fan kit, for Ender-3 V2/Ender-3 S1/Ender-3 S1Pro printers, easy installation
Discontinued
Order Code:
CRN2109
3D Printer Accessory - lighting, for Ender-3 S1/S1 Pro 3D printers, energy-saving operation, easy installation
Discontinued
Order Code:
CRP22_24
3D Printer Accessory - for smart filament weight monitoring, digital display, easy operation, runs on a rechargeable battery, capacity 2 kg, dimensions 52 × 52 × 122 mm
Discontinued
Order Code:
CRP22_05
3D Printer Accessory - E Fit extruder, quick release, with dual drive, Compatible with Bowden and Direct Drive and various types of filaments with a diameter of 1.75 ±0.05 mm, designed for Ender-3 models, Ender-3 V2, Ender-3 Pro, Ender-3 S, CR-10 S, CR-10, CR-10 S5, CR-10 S4, CR-10 Mini, CR-20 and CR-20 Pro
Discontinued
Order Code:
CRP22_06
Discontinued
Order Code:
CREWWP01
3D Printer Accessory - set of parts for manual alignment of the print area
Discontinued
Order Code:
CREAMAWPP01
3D Printer Accessory - 4.3" touch screen, HD resolution, easy installation, compatible with Creality Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2
Discontinued
Order Code:
CR10109
Upgrade Kit - for 3D printers, basic control board, 32-bit 120MHz ARM class Cortex-M3LPC1769, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, on-board operating mode: SPI powered by TMC, operating mode UART, support for LCD2004, LCD12864 , 5" colour touchscreen, supply voltage: 12-24V, dimensions: 110x85mm
Discontinued
Order Code:
tisk3dp005
Upgrade Kit - for 3D printers, basic control board, 32-bit, suitable as replacement for ENDER 3 printer, low power consumption, silent drivers, multiple sources, supply voltage: 12-24V, dimensions: 100x70x25mm
Discontinued
Order Code:
tisk3dp004
Upgrade Kit - for 3D printers, basic control board, 32-bit 120MHz ARM class Cortex-M3LPC1769, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, equipped with highly modular firmware with open source Marlin 2.0, support for LCD2004, LCD12864 , 5" colour touchscreen, supply voltage: 12-24V, dimensions: 110x85mm
Discontinued
Order Code:
tisk3dp003
Upgrade Kit - for 3D printers, motor driver: BIQU TMC2209 v1.2, suitable as replacement for older models A4988 or DRV8825, ability to control bipolar stepper motor, reduction of energy consumption by up to 75%, maximum number of microsteps: 256, supply voltage: 4.75-28V, dimensions: 20.32x15.24mm
Discontinued
Order Code:
tisk3dp002
Upgrade Kit - for 3D printers, basic control board, 32-bit microcontroller, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, function: supports 3 colour filaments, CN fan, supply voltage: 12-24V, dimensions: 147 × 95mm
Discontinued
Order Code:
tisk3dp001
3D Printer Accessory - for Ender 3 v2, all-metal case, aluminium heating and cooling block, isolation silicone case, even printing, thermistor and heating tube temperature range up to 260°C
Discontinued
Order Code:
tisk3dp010
3D Printer Accessory - nozzle set for Creality Ender 3 and Ender 3 PRO 3D printers, brass nozzle: 0.4mm, quality design, sophisticated heating and cooling system for smooth passage of filament and fast strengthening of the model
Discontinued
Order Code:
CR10072
Discontinued
Order Code:
DF451z