Gembird
We can deliver Gembird products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
50
Results
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
16.90 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532d3
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, recommended print speed: from 40mm/s to 60mm/s
Great price
16.90 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532g4
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Headphones - with microphone, headset, ear, closed construction, 3,5mm Jack, with volume control, frequency range: 20 Hz-20000 Hz, sensitivity: 103 dB/mW, impedance: 32 Ohm, cord length of 1,8m
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Power Cable connecting, 0,15m, male connectors: 1× SATA (Serial ATA), female connectors 2× SATA (Serial ATA)
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA+ metallic, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble and fluorescent, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Power Cable connecting, 0,3m, male connectors: 1× SATA (Serial ATA), female connectors 1× SATA (Serial ATA)
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from HIPS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble and metallic, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s