Archive - Construction Site
Choose an alternative in the category
Construction Site
294
Results
Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 40 Nm, motor type: carbonless, chuck range: 13 mm, without battery
Discontinued
Order Code:
RYOBI005
Table saw - with disc, with power of 800W, 2950RPM, disc diameter of 200mm, cutting depth: 45/27mm
Discontinued
Order Code:
BOF151
Discontinued
Order Code:
HRAbz11100
Heat Gun 2300 W, maximum temperature up to 650 °C, air flow 500 l/min, equipment: thermal protection and temperature regulation
Discontinued
Order Code:
BOC756v212
Tacker manual, for buckle length 6-14 mm and 4-10 mm and width 11,3 mm, has the following characteristics: handle lock
Discontinued
Order Code:
BOC756v203
Compressor oil-free, input power 120 W, max. pressure 2,8bar, voltage 12V
Discontinued
Order Code:
BASEg2
Angle Grinder , disc diameter: 125mm, max speed: 9000 rev/min, antivibration handle, weight: 2,1 kg
Discontinued
Order Code:
BOCD011
Heat Gun 1800 W, maximum temperature up to 600 °C, air flow 500 l/min, equipment: thermal protection and temperature regulation
Discontinued
Order Code:
NAR01a52
Straight Grinder - with power use of 130W, speed control
Discontinued
Order Code:
BOSCDre003
Rechargeable Battery for Cordless Tools
Discontinued
Order Code:
BOC07050
Angle Grinder , disc diameter: 150mm, max speed: 7500 rev/min, antivibration handle, weight: 2,1 kg
Discontinued
Order Code:
BOC07041
Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 50 Nm, motor type: carbonless, chuck range: 13 mm, with carrying case
Discontinued
Order Code:
BOC07023
Cordless Drill , Li-Ion, maximum torque: 50 Nm, chuck range: 13 mm
Discontinued
Order Code:
BOC07026
Cordless Screwdriver - 7.2V; 2.0Ah battery (2pcs); Charging time: 40min; Idle speed: 0 - 380 min-1; Clamp / drill size: 0.6-6 mm; Max. tightening torque: 12Nm; Carrying case
Discontinued
Order Code:
MAKInar011
Discontinued
Order Code:
BOCD022
SDS-Plus Rotary Hammer Drill - chuck SDS Plus, 1800 rev/min rated speed, 5100 impact rate per minute, impact energy 2 J, weight 2,3 kg
Discontinued
Order Code:
BOCD021
SDS-Plus Rotary Hammer Drill - chuck SDS Plus, 1800 rev/min rated speed, 5100 impact rate per minute, impact energy 2 J, weight 2 kg
Discontinued
Order Code:
BOCD020
Angle Grinder - cordless, disc diameter 125 mm, max. speed 9800 rev/min, speed control and antivibration handle, requires battery with 18 V voltage, weight 3.3 kg, charger, battery and protective cover included
Discontinued
Order Code:
BOCD016
Angle Grinder - cordless, disc diameter 125 mm, max. speed 9800 rev/min, antivibration handle, requires battery with 18 V voltage, weight 2.3 kg, transport case and protective cover included, battery not included
Discontinued
Order Code:
BOCD015
Screwdriver - 3 transfers, maximum torque: 15 Nm, double anti-corrosion layer with a hardness of up to 60 HRC, 8 different extensions
Discontinued
Order Code:
MSXI14a1
Thermal Imaging Camera - for measuring body temperature, measuring range 30 °C to 45 °C (± 0.5 °C), micro SD card (8 GB, included in the package), 2.4 "LCD display with a resolution of 320 x 240 pixels, temperature detector with a resolution of 160 x 120 pixels, lasts up to 8 hours on a single charge
Discontinued
Order Code:
HiDS
Cordless Drill with hammer, 20 V, maximum torque: 50 Nm, motor type: carbonless, chuck range: 13 mm, package includes 2 × 2 Ah batteries, with carrying case
Discontinued
Order Code:
PWPSET74
Cordless Drill without hammer, 20 V, maximum torque: 35 Nm, motor type: carbon, chuck range: 10 mm, package includes 3 × 1,3 Ah batteries, with carrying case
Discontinued
Order Code:
PWPSET73
Compressor oil, input power 1800 W, flow rate 270l/min, container 50l, max. pressure 10bar, voltage 230V, weight 33,67 kg
Discontinued
Order Code:
BOF146g9
