This page includes the most expensive 3D Printers Sunlu, or more specifically all products from the category 3D Printers Sunlu sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Sunlu FilaDryer S4, which costs 127.90 € incl. VAT. Check it out, you may like it. Or you’ll get inspired.
19
Results
Sunlu FilaDryer S4
3D Printer Accessory -Large capacity, dynamic temperature balancing, automatic humidity control, triple security protection, dimensions 458 × 218 × 312 mm, Holds four rolls of filament weighing 1 kg, heating element with an output of 330 W
127.90 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUN220901a
Sunlu AMS Heater
3D Printer Accessory - simultaneous drying and printing, even heating up to 70 °C within 20 minutes, intelligent humidity and temperature control, Support for stacked printing up to 16 colours, safe operation with PTC heating and automatic shutdown, compatible with first generation AMS systems
122.59 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNF250801
Sunlu FilaDryer S2
3D Printer Accessory 360° constant temperature maintenance, non-slip feet, 4.6" LCD touchscreen, up to 30% higher thermal efficiency, temperature up to 70 °C
58.60 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUN220901
Sunlu PLA 5kg roll White
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 5kg, print temperature: up to 220°C, print mat temperature: 60°C
from
51.38 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNF_28
Sunlu PLA 1kg Blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
15.89 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP23
Sunlu PLA 1kg White
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
15.89 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP20
Sunlu PETG 1kg White
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 70°C, recommended print speed: from 50mm/s to 200mm/s
15.10 €
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP26
Sunlu PETG 1kg Black
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 70°C, recommended print speed: from 50mm/s to 200mm/s
15.10 €
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP25
Sunlu PLA Meta 1kg Lemon Yellow
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 195°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 150mm/s
Discounted -9 %
14.32 €
15.90 €
In stock
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP18
Sunlu PLA 1kg Red
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
13.90 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP22
Sunlu PLA Meta 1kg White
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 195°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 150mm/s
13.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP13
Sunlu PLA 1kg Grey
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
13.90 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP21
Sunlu PLA 1kg Black
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
13.90 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP19
Sunlu PLA Meta 1kg Sky Blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 195°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 150mm/s
13.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP15
Sunlu PLA Meta 1kg Mint green
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 195°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 150mm/s
13.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP14
Sunlu PLA Meta 1kg Cherry Red
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 195°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 150mm/s
13.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP11
Sunlu PLA 1kg Silver
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
13.90 €
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNFP24
Sunlu PLA transparent Red
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, recommended print speed: from 30mm/s to 60mm/s
Filament Connector Tube
3D Printer Accessory -Spare Teflon tubes made of durable PTFE material, 200 pcs per pack, ensures smooth passage of filaments during joining, inner diameter 1,8 mm, outer diameter 2,2 mm, length 26 mm
4.99 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUN241202
Chcete doručit do České republiky? Jdi na
3D tiskárny
Chcete doručiť tovar na Slovensko? Prezrite si
3D tlačiarne
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
3D nyomtatók