PLASTY MLADEČ
We can deliver PLASTY MLADEČ products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
86
Results
Filament PM 1,75 FRJet White 0,5 kg
Filament - made from PETG, filament diameter: 1.75mm, weight: 0,5kg, print temperature: up to 250°C, print mat temperature: 85°C
22.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100b38
Filament PM 1,75 TPE88 Red 0,5 kg
Filament - made from TPE flexible and matte, filament diameter: 1.75mm with a tolerance of 0.1mm, weight: 0,5kg, print temperature: up to 230°C, recommended print speed: from 10mm/s to 20mm/s
33.90 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100b26
Magigoo adhesive stick for 3D printing Pro PA
3D Printer Accessory Ideal for materials: NYLON PAJET 160. MAGIGOO is an easy to use liquid "glue" to increase the adhesion of the first layer during printing. Good adhesion of the first layer is important, as this layer forms the basis of the entire print. MAGIGOO is water soluble, so it is easy to remove after printing. After each print, we recommend removing the adhesive with a damp cloth to prevent excess build-up of MAGIGOO adhesive on the printing surface. Works on both glass and Ultem backing.
26.90 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD014a5a03
Filament PM 1,75 SILK Dark Pink 1 kg
Filament - made from PLA silk, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 60°C
20.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100b09
Filament PM 1,75 SILK Copper Charm 1 kg
Filament - made from PLA silk, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 60°C
20.90 €
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100b04
Filament PM 1,75 RePETG recycled, 1 kg
Filament - made from rPETG, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 90°C
15.90 €
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100a20
Filament PM 1,75 RePLA Builder Pack 3x1 kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 3kg, print temperature: up to 210°C, print mat temperature: 60°C
44.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100b68
Filament PM 1,75 PLA "Envy Green" 1 kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C
23.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100b63
Filament PM - 1,75mm Builder Pack RePETG - 3x 1kg
Filament - made from rPLA, filament diameter: 1.75mm, weight: 3kg, print temperature: up to 250°C, print mat temperature: 90°C
44.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PMD100a14
Filament PM 1.75mm PLA 1kg metallic green
Filament - made from PLA metallic, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament PM 1.75mm TPE88 0.5kg transparent
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.01mm, weight: 0,5kg, print temperature: up to 230°C, recommended print speed: from 40mm/s to 20mm/s
Filament PM Filament PETG 1.75mm 1kg Transparent Yellow
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 40mm/s
Filament PM 1.75mm ABS 1kg orange
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C, recommended print speed: from 40mm/s to 60mm/s
Filament PM 1.75mm PETG 1kg Transparent Blue
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 40mm/s
Filament PM 1.75 PETG 1kg Red
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Filament PM 1,75 PETG blue, 1 kg
Filament - made from PETG, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C
Filament PM 1.75 PLA+ Viva Magenta 1 kg
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament PM 1.75 PLA+ Skin 479C 1 kg
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament PM 1.75 PLA+ Skin 477C 1 kg
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament PM 1,75 TPU96 Black 0,5 kg
Filament - made from TPU, filament diameter: 1.75mm, weight: 0,5kg, print temperature: up to 250°C, print mat temperature: 60°C
Filament PM 1.75 PLA+ Skin 478C 1 kg
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament PM 1,75 SILK Sky Blue 1 kg
Filament - made from PLA silk, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 60°C
Filament PM 1.75mm PETG 2kg Black
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 2kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Filament PM 1.75 PLA + 1kg Sweet Mint
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C