EK Water Blocks EK-KIT RGB S360

The EK Water Blocks EK-KIT RGB S360 is exactly what you need to get the best out of a gaming computer. It will help you to lessen the dangerously high temperature of the processor by causing a better airflow in the computer case. As this is a water-cooled circuit with a special construction, this also guarantees that your computer will look totally different from the rest. A uniquely developed fluid flows through the fibre-reinforced tubes, which is then cooled in the large radiator that has 3 fans. The EK Water Blocks EK-KIT RGB S360 fully replaces a loud cooling system that uses up too much energy. This new water-cooling model has further extended the possibility of speed control and features an original backlight. This water-cooling system from EK Water Blocks supports AM4 AMD sockets, and 1200, 1150, 1151, 1155, 1156, 2011, 2011-3 and 2066 Intel sockets.

EK Water Blocks EK-KIT RGB S360 Water Cooling System Key Features

• Adjust the cooler to your desired colour with the help of the RGB backlight
• Water cooling supports sockets from AMD: AM4
• The water cooler supports sockets from Intel: 1200, 1150, 1151, 1155, 1156, 2011, 2011-3 and 2066
• Fans have a maximum speed of 2200 RPM
• Noise does not exceed the limit of 33,5dB
• Dimensions of the cooling system: Width of 393mm ; Height of 28mm and Depth of 120mm

EK Water Blocks Water Cooler Adjustments

This set that can cool down the most progressive CPU’s, is built from 3 piece(s) fans, good pumps and a high-performing radiator. You can keep the water cooling at a comfortable rate by changing the speed of the fan. The highest speed you can set it to is 2200RPM. In addition to setting the speed, you may use the RGB backlight and brighten up your desktop computer to your liking.

A New Cooling Method with this

If you are unsure about selecting a liquid CPU cooler instead of an air cooler, then you should think about the proof. Generally, a CPU water cooler takes up less of the valuable space of a PC than a bulky air cooler. The average user can easily install the water cooler, since it is pre-filled and is easy to set up inside the computer case. EK Water Blocks, the manufacturer, took care to make the coolant stay sealed in the tubing and require zero maintenance for years. You don't have to worry about dampness short-circuiting your PC.