Cooler Master Blizzard T2

Cooler Master Blizzard T2 offers excellent cooling performance, even though it only has two heatpipes. This is due to patented Dual Loop, which perfectly conveys heat away from the busiest parts of the processor. The cooler can be mounted on most standard motherboard slots. The fan can easily be clipped so that installation or removal when cleaning is not a problem. You can also easily buy and replace the fan for stronger, or quieter.

Heatpipe Dual Loop design doubles the heat dissipation from the CPU, aluminum passive cooling technologies CDC (Continuous Direct Contact) minimizes the thermal resistance and the fan can operate at lower speeds. Plain bearings of "jeans" make minimal noise and at the same time have a long life 40,000 hours. Air flow is 43 cubic feet per minute, at 30 dBA noise. The package includes a complete installation equipment.

Specifications:

Compatibility:
Intel LGA 1156/1155/775
AMD AM2 (+)/AM3 (+)/FM1

Fan:
Dimensions: 92 x 92 x 25 mm
Bearings: hydraulic friction (rifle)
Speed \u200b\u200bof 2200 rpm./Min. ± 10%
Air Flow: 43 CF/min. (2200 rev/min.)
Air Pressure: 2.2 mm H2O ± 10%
Life span: 40,000 hours
Noise level: 30 dBA
Connector: 3pin
Voltage/Current/Power consumption: 12 V/0.17 A ± 10%/2,16 W
Weight: 79 g

Design:
Dimensions: 93 x 80 x 140 mm
Dimensions passive parts: 90 x 51 x 140 mm
Material passive part: 2 Dual Loop heatpipe/aluminum fins
Average heatpipe: 6 mm
Total weight: 340 g