
PowerBeam AC offers minimal latency, noise immunity and impressive throughput. It achieves stable connection over large distances in noisy surroundings of larger cities because of its size, despite its high gain and directivity. Nothing stands in the way of high transmission speeds. Due to adjust the width of the channel can be achieved with 256QAM real throughput up to 450 Mbps.
Brilliant properties based on an innovative design eliminates cable losses, but it is important to remain hidden from sight. The new operating system AirOS 7 realtime portrays the constellation diagram and the value of SNR, so that the correct focus will be a breeze. Performance Management supports specialized processor. Of course it is an Ethernet connector with a speed of 1 Gbps. Over the same cable antenna can be powered by a supplied adapter (PoE passive).
Specifications:
Profit:
25 dBi
Range:
25+ km
Size mode Channel:
PtP: 10/20/30/40/50/60/80 MHz
PtMP: 10/20/30/40 MHz
Polarization:
Dual Linear
Max. VSWR:
1.5: 1
power supply:
Power Method: Passive PoE
Source: Gigabit PoE adatér (24 V, 0.5 A)
Max. Power Consumption: 5.5W
Supported voltage range: 20-26 V (DC)
Network interface:
1 x 10/100 / 1000Mbps Ethernet port
hardware:
Processor: Atheros MIPS 74Kc, 560 MHz
Memory: 64MB DDR2, 16 MB flash
Dimensions:
459 × 459 × 261 mm
Weight:
3.22 kg
Ubiquiti International Holding B.V., Ekkersrijt 3102. Son en Breugel, 5692 CC. Netherlands, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.