Archive - 3D Printing Accessories
Choose an alternative in the category
3D Printing Accessories
80
Results
3D Printer Accessory - for cleaning and curing resin 3D models, 360° rotatable platform, height adjustable holder, UV curing, max. model size for cleaning/curing: 170×120×160mm / 165×165×200mm
Discontinued
Order Code:
CRECURWASH
3D Printer Accessory - for Creality Ender 3, raises the Z axis by 10cm, aluminium profile: 50cm, threaded rods: 45cm
Discontinued
Order Code:
CREAXIS
3D Printer Accessory - for Creality Ender, for engraving on wood, skin, paper and.., adjustable focus, contains a 405nm blue-violet laser, connection module with cable, wooden plates and safety glasses
Discontinued
Order Code:
CRE4w
3D Printer Accessory - for Creality Ender, for engraving on wood, skin, paper and.., adjustable focus, contains a 405nm blue-violet laser, connection module with cable, wooden plates and safety glasses
Discontinued
Order Code:
CRE16w
3D Printer Accessory - for Creality Ender, for engraving on wood, skin, paper and.., adjustable focus, contains a 405nm blue-violet laser, connection module with cable, wooden plates and safety glasses
Discontinued
Order Code:
CRE05w
3D Printer Accessory - filament dryer suitable for printing strings with a diameter of 1.75/2.85/3mm, drying time: 1-24 hours, temperature setting: 35-55°C, prepares printing filament for 3D printing
Discontinued
Order Code:
SUNWa01
Printer Bed - for 3D printers, double-sided printing magnetic PEI pad with a rough and smooth surface, maximum recommended temperature: 110°C, dimensions: 241x254mm, suitable for Prusa MK3 printers
Discontinued
Order Code:
CR109034
Printer Bed - for 3D printers, double-sided magnetic printing PEI pad with a rough and smooth surface, maximum recommended temperature: 110°C, dimensions: 235x235mm, suitable for Ender 3/3 PRO printers
Discontinued
Order Code:
CR109027
Printer Bed - for 3D printers, double-sided magnetic printing PEI pad with a rough and smooth surface, maximum recommended temperature: 110°C, the package includes a magnetic adhesive pad for the bed, dimensions: 235x235mm, suitable for Ender 3/3 PRO printers
Discontinued
Order Code:
CR109010
3D Printer Accessory - cleans and cures 3D models, UV rays (365nm to 405nm), rotating platform, adjustable holder, maximum model size for cleaning: 115 x 65 x 165mm, maximum size for curing: 140x165mm, for greater durability and resistance of 3D models
Discontinued
Order Code:
ANYLCW
Upgrade Kit - for 3D printers, basic control board, 32-bit 120MHz ARM class Cortex-M3LPC1769, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, on-board operating mode: SPI powered by TMC, operating mode UART, support for LCD2004, LCD12864 , 5" colour touchscreen, supply voltage: 12-24V, dimensions: 110x85mm
Discontinued
Order Code:
tisk3dp005
Upgrade Kit - for 3D printers, basic control board, 32-bit, suitable as replacement for ENDER 3 printer, low power consumption, silent drivers, multiple sources, supply voltage: 12-24V, dimensions: 100x70x25mm
Discontinued
Order Code:
tisk3dp004
Upgrade Kit - for 3D printers, basic control board, 32-bit 120MHz ARM class Cortex-M3LPC1769, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, equipped with highly modular firmware with open source Marlin 2.0, support for LCD2004, LCD12864 , 5" colour touchscreen, supply voltage: 12-24V, dimensions: 110x85mm
Discontinued
Order Code:
tisk3dp003
Upgrade Kit - for 3D printers, motor driver: BIQU TMC2209 v1.2, suitable as replacement for older models A4988 or DRV8825, ability to control bipolar stepper motor, reduction of energy consumption by up to 75%, maximum number of microsteps: 256, supply voltage: 4.75-28V, dimensions: 20.32x15.24mm
Discontinued
Order Code:
tisk3dp002
Upgrade Kit - for 3D printers, basic control board, 32-bit microcontroller, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, function: supports 3 colour filaments, CN fan, supply voltage: 12-24V, dimensions: 147 × 95mm
Discontinued
Order Code:
tisk3dp001
3D Printer Accessory - silicone carbon glass plate, recommended temperature range for PLA: 50-70°C, dimensions: 235x235mm, twice as thick as ordinary glass, adhesive structure, especially suitable for Ender 3 and Ender 3 PRO
Discontinued
Order Code:
tisk3dp008
3D Printer Accessory - for Ender 3 v2, all-metal case, aluminium heating and cooling block, isolation silicone case, even printing, thermistor and heating tube temperature range up to 260°C
Discontinued
Order Code:
tisk3dp010
3D Printer Accessory - for Ender 3/PRO, all-metal housing, aluminium heating and cooling block, insulating silicone housing, even printing, thermistor and heating tube temperature range up to 260°C
Discontinued
Order Code:
tisk3dp009
3D Printer Accessory - nozzle set for Creality Ender 3 and Ender 3 PRO 3D printers, brass nozzle: 0.4mm, quality design, sophisticated heating and cooling system for smooth passage of filament and fast strengthening of the model
Discontinued
Order Code:
CR10072
3D Printer Accessory - for the Original Prusa SL1 3D printer, preheats resin, washes/dries/cures printed models, hardens with 4 UV strips, 4-in-1 device, simple operation, average power consumption: 130W, CW1 dimensions: 21.8 × 34.5 × 23.2cm
Discontinued
Order Code:
DF514c
Discontinued
Order Code:
CR1007
3D Printer Accessory - set of 5 nozzles with different diameters (0.2mm, 0.3mm, 0.4mm, 0.6mm, 0.8mm), original part for 3D printers Creality, designed for Ender and CR (with exception of CR-10S PRO and CR-X), designed for filament with 1.75mm diameter
Discontinued
Order Code:
CR1006
Discontinued
Order Code:
CR1004
Printer Bed - magnetic pad, original part for Creality 3D printers, designed for Ender 3/PRO, suitable for temperatures up to 110°C
Discontinued
Order Code:
CR1001c