Anycubic Kobra S1 combo
Don't like the alternatives? Choose from the full product list
Anycubic Kobra S1 combo
Key Features of Anycubic Kobra S1 Combo 3D Printer
- Anycubic Kobra S1 Combo enables multi-colour 3D printing in 4 or 8 colours
- Fully enclosed CoreXY design ensures stable printing even at high speeds
- The Anycubic Kobra S1 Combo 3D printer offers very quiet operation with up to 44 dB noise level in silent mode
- Active filament drying improves print quality even with more demanding materials
- 250 × 250 × 250 mm print space allows 3D printing of larger models without the need to cut them up
- The Anycubic Kobra S1 Combo 3D Printer achieves extreme print speeds of up to 600 mm/s with acceleration of 20,000 mm/s²
- Automatic alignment of the LeviQ 3.0 pad ensures a perfect first layer
- Full metal quick-change hotend provides a maximum temperature of up to 320 °C
- Anycubic Kobra S1 Combo features an out-of-filament sensor with automatic print pause
- Anycubic Kobra S1 Combo supports 3D printing from PLA / PETG / TPU / ABS / ASA filaments
- Minimal assembly required the Anycubic Kobra S1 combo 3D printer is ready to use in 15 minutes out of the box
- Use Anycubic to control the printer remotely
- Anycubic Kobra S1 Combo is compatible with Anycubic Slicer Next ecosystem
Anycubic Kobra S1 combo
Multi-colour FDM 3D printer with closed design
The Anycubic Kobra S1 Combo is a modern FDM 3D printer with a closed design that allows you to print quickly, quietly and multicolour in 4 colours without the need for complicated setup. With a high print speed of up to 600 mm/s and an acceleration of 20,000 mm/s², the Anycubic Kobra S1 Combo can handle prototypes and finished models in record time, while the 250 x 250 x 250 mm print space gives you plenty of room to 3D print larger models and more complex projects without having to cut them up. A smooth start to every print is assured by the enhanced LeviQ 3.0 auto-alignment pad, which supports Z-offset and ensures perfect first layer adhesion. The Anycubic Kobra S1 Combo 3D Printer is equipped with active filament drying, allowing you to print stably even from more demanding materials without the risk of cracking or unevenness. The full metal quick-change hotend with a maximum temperature of up to 320°C is clog-resistant and allows you to 3D print a wide range of materials including PLA, PETG, TPU, ABS and ASA. You'll enjoy ultra-quiet operation with up to 44dB of noise, intelligent features like AI print error detection, power failure recovery and a clear 4.3″ touchscreen. The Anycubic Kobra S1 Combo 3D Printer is ready to print in just 15 minutes out of the box, and thanks to the Anycubic Slicer Next connection and mobile app, it gives you full control over 3D printing at home and remotely. This makes it the ideal 3D printer for makers, designers and enthusiasts who want to print quickly, colourfully and quietly.
Multi-colour 3D printing in 4 colours
Anycubic Kobra S1 Combo supports multi-colour 3D printing, allowing you to create colour-rich and visually striking models without manually changing materials. The printer works with 4 colours, and you can expand the module up to 8 colours, which you will appreciate when printing decorations, prototypes and detailed design models. You get professional-looking results straight from a single print job.
Active filament drying for stable print quality
With active filament drying, the Anycubic Kobra S1 Combo 3D printer keeps the material in optimal condition throughout the printing process. Thanks to controlled moisture wicking, the risk of cracking, uneven extrusion or poor layer adhesion is significantly reduced, which is especially appreciated when using more sensitive filaments. Active filament drying contributes to a better surface finish on models even on long print jobs.
Automatic pad alignment ensures higher print success rates
The enhanced LeviQ 3.0 Auto Pad Alignment System ensures you can accurately adjust the print area without the need for manual intervention. Thanks to a more stable Y-axis, high-quality X-axis bearings and intelligent calibration, the printer automatically adjusts to the unevenness of the substrate and ensures the optimal nozzle-to-surface distance. The result is a reliable first layer, improved model adhesion and significantly higher print success rates right from the first run.
Fully enclosed CoreXY design for stable printing
The Anycubic Kobra S1 Combo 3D Printer uses a fully enclosed CoreXY design to ensure high mechanical stability, precise motion control and consistent print quality even at high speeds. The enclosed print area helps maintain stable temperature conditions inside the printer, which is especially appreciated when printing from materials such as ABS or ASA, and will contribute to better layer adhesion and overall print quality. You'll be able to print quickly and smoothly, with minimal vibration and no loss of accuracy.
3D printer compatible with the most commonly used filaments
With Anycubic Kobra S1 Combo you can work with most commonly used filaments without limitations. The 3D printer is compatible with PLA materials, PETG, TPU, ABS and ASA allowing you to print both detailed decorative models, such as rigid functional parts or flexible components. You get the freedom to choose the material for your creative and technical projects.
AI Spaghetti Detection for print protection and material savings
AI Spaghetti Detection automatically detects print failures, such as unwanted spaghetti, using intelligent algorithms. The Anycubic Kobra S1 Combo can provide early warning or intervention to help prevent filament waste, damage to the model in progress and unnecessary printer load. It brings greater confidence of successful printing, less waste and greater peace of mind, especially for long or large-format print jobs.
Improved nozzle minimizes filament leakage
The Anycubic Kobra S1 Combo 3D Printer is equipped with a quick-change hotend with a maximum temperature of up to 320°C, allowing you to easily maintain and quickly change without unnecessary downtime. The nozzle uses a ceramic composite aerospace-grade throat tube, which ensures stable heat conduction, smooth filament flow and high durability even under long-term load.
High print volume for creative projects
Anycubic Kobra 3 S1 Combo will give you enough space to realize your ideas.
Quiet operation suitable for home and office
Thanks to its very quiet operation, you will appreciate the Anycubic Kobra S1 Combo in everyday use at home and in the office. In standard print mode, it reaches noise levels as low as 46dB, while quiet mode reduces noise levels to 44dB without compromising print quality. Thanks to the low noise level, you can operate the 3D printer in living spaces or while working without disturbing your concentration or rest.
Automatic settings for fast print start
With minimal installation required, the Anycubic Kobra S1 Combo 3D printer is ready to use in just 15 minutes out of the box, which both beginners and experienced users appreciate. Intelligent assistance features guide you step-by-step through initial setup, automatic calibration and printing, reducing the risk of errors and ensuring every print job runs smoothly.
Print speeds up to 600 mm/sec ensure maximum productivity
The Anycubic Kobra S1 Combo achieves a maximum print speed of up to 600 mm/s, which significantly reduces printing time compared to conventional FDM printers. The high speed combined with a maximum acceleration of 20,000 mm/s² allows you to quickly produce prototypes and finished models without unnecessary downtime, while the printer maintains accuracy and quality of detail.
Anycubic ecosystem enables convenient 3D printing
The Anycubic ecosystem connects the Anycubic Kobra S1 Combo 3D printer, software and mobile app into one clear environment. With Anycubic Slicer Next, you can easily prepare print data with optimized profiles, while the mobile app gives you remote control, real-time print monitoring and an overview of the progress and history of print jobs. So you have full control over your printing at home and remotely.
Package contents:
1× 3D printer Anycubic Kobra S1
1× Anycubic colour Engine Pro (ACE Pro)
1× Filament spool holder Signal cable
4× Filament tubes
1× Mounting screws: M3 × 6 (2 ×) M2,5 × 25 (2 ×)
1× Lubricant
1× Allen wrench set (1.5 / 2.0 / 2.5 mm)
1× Nozzle cleaner
1× Filament sample
1× USB drive
2× Power Cables
1× Active carbon filter
1× Anti-blocking module
1× Silicone nozzle cover
2× Cable organizers
1× Nozzle cleaning module
Specifications
Power outlet type
3D printing technology
Print material properties
Printing area
Layer thickness
Max. recommended print speed
Print options
Printer type
Number of heads
Display
Specifications can be changed without notice. Images are for illustrative purposes only.
