C-TECH
We can deliver C-TECH products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
114
Results
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
E-Book Reader Case for 7'' e-reader, hard case, wake/sleep function
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
E-Book Reader Case for 6'' e-reader, hard case, wake/sleep function
Filament - made from ABS ABS+ and soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 100°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PLA marble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
E-Book Reader Case for 7'' e-reader, hard case, wake/sleep function
Filament - made from ABS ABS+ and soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 100°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from ABS ABS+ and soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 100°C, recommended print speed: from 35mm/s to 140mm/s
Filament - made from ASA soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 140mm/s