On this page you will find 3D Printer Filament Spectrum at the lowest prices, more so all 3D Printer Filament Spectrum ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is The Filament ReFill PLA 1.75mm Sorbet Yellow 1kg marked at 13.90 € incl. VAT. Is this what you’re looking for?
355
Results
Filament - made from PLA twinkling, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 150mm/s
Discounted -23 %
22.90 €
29.80 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF611k
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 120mm/s
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 120mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
23.68 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF613h
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
23.70 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF614a
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
23.70 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF614c
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 200mm/s
Discounted -11 %
23.90 €
26.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633n
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
23.90 €
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF616m
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
23.90 €
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF613j
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
23.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF613g
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 200mm/s
23.90 €
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF611r
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 200mm/s
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 200mm/s
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
Chcete doručit do České republiky? Jdi na
Filamenty pro 3D tiskárny
Chcete doručiť tovar na Slovensko? Prezrite si
Filamenty do 3D tlačiarne
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker-Filamente
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
3D nyomtató filamentek