Zerotherm Huricane HC92
Zerotherm Huricane HC92
Discontinued
Zerotherm Huricane HC92
Executive active radiator designed for the latest video card NVIDIA GeForce 8800, but works on other cards, including ATI competitive.Moreover, they included a passive cooler memory on the graphics card.The material is pure copper coolers, a single passive cooler memories are aluminium, of course, the use of technology heatpipe.Another great thing is the remote controller speed coolers, which can set the maximum speed at the play, to a minimum during normal operation of your computer.This is a unique piece of hardware, fits into many graphics cards, is decorated with blue LED for reviving the appearance of computer boxes.
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in a gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back.When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Compatible slot:
NVIDIA GeForce 7600 (except for AGP version), 7800, 7900 (except for AGP, GX2 version), 8500, 8600, 8800
ATI Radeon X1600, X1800, X1900, X2600
Fan:
Dimensions:92 x 92 x 25 mm
Speed:1500 ~ 3300 RPM
Airflow:45.5 ~ 98 m 3 / h (26.8 ~ 57.7 CFM)
Bearings:UFO
Noise:19 ~ 40 dB
Control of the panel
3rd blue LED
Control panel:
Dimensions:34 x 80 x 24 mm
Cable length:1 m
Power:5 ~ 11 VDC
Connector:3-pin
Material:
Copper
Passive memory cooler:Aluminium
Heatpipe:
Number:4
Material:copper
Power:
3-pin konekor
5 ~ 12 VDC
Dimensions:
170 x 98 x 55 mm
Weight:
372 g
Part of the package:
Cooler
Remote Control
Teplovodivá pasta
Passive cooler mind
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in a gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back.When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Compatible slot:
NVIDIA GeForce 7600 (except for AGP version), 7800, 7900 (except for AGP, GX2 version), 8500, 8600, 8800
ATI Radeon X1600, X1800, X1900, X2600
Fan:
Dimensions:92 x 92 x 25 mm
Speed:1500 ~ 3300 RPM
Airflow:45.5 ~ 98 m 3 / h (26.8 ~ 57.7 CFM)
Bearings:UFO
Noise:19 ~ 40 dB
Control of the panel
3rd blue LED
Control panel:
Dimensions:34 x 80 x 24 mm
Cable length:1 m
Power:5 ~ 11 VDC
Connector:3-pin
Material:
Copper
Passive memory cooler:Aluminium
Heatpipe:
Number:4
Material:copper
Power:
3-pin konekor
5 ~ 12 VDC
Dimensions:
170 x 98 x 55 mm
Weight:
372 g
Part of the package:
Cooler
Remote Control
Teplovodivá pasta
Passive cooler mind
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
