Edimax ES-5224R+, Smart Switch, 24xFE + 2xGE (osazeno RJ45)
Don't like the alternatives? Choose from the full product list
Edimax ES-5224R+, Smart Switch, 24xFE + 2xGE (osazeno RJ45)
Discontinued
Edimax ES-5224R+, Smart Switch, 24xFE + 2xGE (osazeno RJ45)
Switch (packet switch) with two Gigabit (10/100/1000) and 24 10/100 Mbit / s ports.
Features:
Complies with the IEEE802.3 Ethernet, IEEE802.3U Fast Ethernet and IEEE802.3ab Gigabit Ethernet standard
Provide Store-and-Forward architecture and full wire speed filtering and forwarding rate
Gigabit Ports support 10/100/1000Mbps and Auto-MDI/MDI-X
10/100Mbps Ports support full / half duplex modes and auto-negotiation
Support up to 1K MAC address
Provide up to 8MBytes (EC-5216R +), and 10MBytes (EC-5224R +) buffer memory
Support IEEE802.3 compliant full-duplex flow control, half-duplex flow control
Support one console port for smart function configuration (VLAN / Trunking / QoS)
Support Port-based VLAN
6 Trunking Support Group, each group combining up to 8 100Base-TX ports and provides up to 16Gbps (Full-duplex) trunking bandwidth.
Support IEEE 802nd1p:4 Priority queues on all ports
Specifications:
Standard:IEEE802.3, IEEE802.3U, IEEE802.3ab
Gigabit Ports:2 ports with RJ-45 connectors
10/100Mbps Ports:24 ports with RJ-45 connectors
Uplink Port:1 port with RJ-45 connector
Console Port:1 RS-232 DB-9 male
Network Media:
10Base-T, UTP / STP category 3 or 5 cable
100Base-TX, UTP / STP Category 5 cable
1000Base-TX, 4 pairs category 5 cable
Architecture:Store and Forward
MAC Address Table:1K
Buffer Memory:8MBytes (EC-5216R +), 10MBytes (EC-5224R +)
Flow Control:Back pressure for half-duplex, IEEE 802nd3x for full-duplex mode
VLAN:Port-based VLAN up to 8 groups
Trunking:6 Trunking Group, each group combining up to 8 100Base-TX ports
QoS:IEEE 802nd1p, support 4 levels priorities
Port Mirroring:Mirror port's in / out, in, out traffic
LED System:Power
Port LEDs:10/100Mbps - Link / Activity, Speed, Full-duplex/Collision
Gigabit - Link1000, Link100, Link10, FDX / COL, TX, RX Activity
Dimension:440 mm (L) x 220 mm (W) x 44 mm (H) 1U rackmount
Weight:2nd5 kilograms (55lb.)
Temperature:00 to 500C
Humidity:10% ~ 90% (noncondensing)
Input Power Requirement:100 - 240VAC, 50 - 60Hz, Auto-sensing
Certification:FCC Class A, CE Mark
Features:
Complies with the IEEE802.3 Ethernet, IEEE802.3U Fast Ethernet and IEEE802.3ab Gigabit Ethernet standard
Provide Store-and-Forward architecture and full wire speed filtering and forwarding rate
Gigabit Ports support 10/100/1000Mbps and Auto-MDI/MDI-X
10/100Mbps Ports support full / half duplex modes and auto-negotiation
Support up to 1K MAC address
Provide up to 8MBytes (EC-5216R +), and 10MBytes (EC-5224R +) buffer memory
Support IEEE802.3 compliant full-duplex flow control, half-duplex flow control
Support one console port for smart function configuration (VLAN / Trunking / QoS)
Support Port-based VLAN
6 Trunking Support Group, each group combining up to 8 100Base-TX ports and provides up to 16Gbps (Full-duplex) trunking bandwidth.
Support IEEE 802nd1p:4 Priority queues on all ports
Specifications:
Standard:IEEE802.3, IEEE802.3U, IEEE802.3ab
Gigabit Ports:2 ports with RJ-45 connectors
10/100Mbps Ports:24 ports with RJ-45 connectors
Uplink Port:1 port with RJ-45 connector
Console Port:1 RS-232 DB-9 male
Network Media:
10Base-T, UTP / STP category 3 or 5 cable
100Base-TX, UTP / STP Category 5 cable
1000Base-TX, 4 pairs category 5 cable
Architecture:Store and Forward
MAC Address Table:1K
Buffer Memory:8MBytes (EC-5216R +), 10MBytes (EC-5224R +)
Flow Control:Back pressure for half-duplex, IEEE 802nd3x for full-duplex mode
VLAN:Port-based VLAN up to 8 groups
Trunking:6 Trunking Group, each group combining up to 8 100Base-TX ports
QoS:IEEE 802nd1p, support 4 levels priorities
Port Mirroring:Mirror port's in / out, in, out traffic
LED System:Power
Port LEDs:10/100Mbps - Link / Activity, Speed, Full-duplex/Collision
Gigabit - Link1000, Link100, Link10, FDX / COL, TX, RX Activity
Dimension:440 mm (L) x 220 mm (W) x 44 mm (H) 1U rackmount
Weight:2nd5 kilograms (55lb.)
Temperature:00 to 500C
Humidity:10% ~ 90% (noncondensing)
Input Power Requirement:100 - 240VAC, 50 - 60Hz, Auto-sensing
Certification:FCC Class A, CE Mark
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
