Hutt C7
- Reviews 1
- Help and manuals
- Specifications
- Photos & Videos 5
- Alternatives 7
- Accessories and suggested products
Hutt C7
The HUTT C7 robotic window cleaner uses an innovative system with two independent motors and a 3D sprung chassis, which creates a downforce of 55N and helps maintain even contact with the surface being cleaned. A suction power of up to 5,500Pa, fast-rotating cleaning discs, and a pressurised water spray help to remove dust, dried-on droplets, grease, and other stubborn dirt. The HUTT C7 can be used on windows, mirrors, smooth tiles, and other suitable flat vertical surfaces.
Key Features of the HUTT C7 Robotic Window Cleaner
- HUTTHINK 5.0 intelligent power control
- HUTT-SLAM 4.0 navigation system
- Up to 99% coverage of the cleaned area
- Two independently driven cleaning discs
- Cleaning disc rotation speed of up to 70rpm
- 3D sprung chassis with 55N downforce
- Triangular pressure arrangement for stable movement
- Suction power up to 5,500Pa
- Automatic adjustment of suction power to the surface
- Pressurised water spray at a 120° angle
- Fine water droplets of approximately 20μm
- Helps to loosen up to 15 types of dirt
- Transparent 80ml water tank
- Cleaning close to the edges of window frames
- 13 precision sensors for safe movement
- Pressure change compensation within 0.03 seconds
- Backup protection for up to 20 minutes in case of power failure
- Audible alarm in case of an emergency
- Safety rope that withstands a tensile force of up to 148kg
- One-button or remote control operation
- Practical 2-in-1 combination of power cable and safety rope
Intelligent Route Planning
The HUTT C7 combines the HUTTHINK 5.0 intelligent power control system with HUTT-SLAM 4.0 navigation. The robot automatically plans an efficient route, recognises edges and obstacles, and systematically moves across the entire area to be cleaned. This achieves up to 99% coverage and reduces unnecessary repeated movement on already cleaned areas.
Stable Adhesion and Effective Cleaning
The patented 3D sprung chassis creates a downforce of 55N and continuously adapts to the surface being cleaned. This helps maintain close contact with the glass, reduces the loss of suction power, and prevents circular marks from the cleaning discs. Two independent motors drive each disc separately, which contributes to stable movement even on wet surfaces. In addition, the triangular pressure arrangement increases friction and reduces the risk of slipping. The cleaning discs rotate at up to 70 revolutions per minute and, together with a suction power of up to 5,500Pa, help to remove dust, dried-on droplets, bird droppings, and other stubborn dirt. At the same time, the soft pads protect the glass surface from scratching.
Pressurised Water Spray
The HUTT C7 uses a wide-angle, V-shaped pressurised water spray. A stream of fine droplets, approximately 20μm in size, covers the surface at a 120° angle and helps to soften up to 15 types of dirt, including dried-on droplets, mud, and greasy marks. The spray is designed to deliver water evenly in front of the moving cleaning discs and to be less dispersed by the airflow. The transparent 80ml tank makes it easy to check the remaining water level. It is made of a corrosion-resistant material and can be filled with water or a suitable non-corrosive cleaning solution designed for glass surfaces.
Safety First
A total of 13 precision sensors continuously monitor edges, obstacles, and the robot's adhesion to the surface. The system can react to pressure changes within 0.03 seconds and helps to maintain a stable suction. In the event of an unexpected power cut, a backup battery is activated, which will keep the HUTT C7 attached to the glass for up to 20 minutes. An audible alarm will also alert you to the situation. A safety rope that can withstand a tensile force of up to 148kg provides additional protection when cleaning at heights. Before starting the robot, it must always be properly attached to a fixed point.
Easy Operation for Fewer Worries
You can start the HUTT C7 robotic cleaner with a single button and also control its movement using the remote control. The extended cleaning cloth reaches closer to the edges of window frames, helping to reduce the areas that need to be finished by hand. The removable pads can be gently cleaned after use, allowed to dry, and used repeatedly. The power cable and safety rope are combined in a practical 2-in-1 design, which reduces tangling during operation and subsequent storage.
Specifications
Power Supply
Colour
Features
Functions
Noise level
Dimensions and weight
Specifications can be changed without notice. Images are for illustrative purposes only.
