ATEN CS-1708

Executive in the implementation of an electronic switch to 19 "Rackmount allow you to control up to 8 computers with one keyboard, mouse and LCD display and VGA monitor with the D-Sub.The work and installation of switches is very simple.Just connect the keyboard and mouse using a USB connector and VGA monitor with a D-Sub into the switches and then using the 8 sets of connectors to computers.Among the different systems you can switch using shortcuts or OSD menu.

As an indication serves 8 LEDs showing the selected computer or 8 diodes indicating connected computer.To install no software required.Add and remove the computer is possible as well as their running.Support is overwhelming majority of operating systems.There is an administration interface with the possibility of using password protection and the opportunity to connect up to 256 computers through cascading.

The parameters and specifications:

Maximum number of connected computers:
8 (using cascading up to 256 computers)

Přepínaní computers:
With shortcuts or OSD menu

Input connectors:
1 x USB Type A (keyboard)
1 x USB Type A (mouse)
1 x Video VGA D-Sub
1 x RJ-11 (firmware upgrade)

Outputs to computers:
8 x SPHD-15

Chain ports (cascading):
1 x DB-25 entry
1 x DB-25 output

Indications:
8 x LED (selected by computer)
8 x LED (on-line computer attached)
2 x LED 7-segment (ID station)
1 x LED (power)

Maximum resolution video:
2048 x 1536 points

Scanning interval:
1 to 255 seconds

Dimensions:
433 x 160 x 44 mm

Weight:
2.73 kg

The contents of the package:
1 x KVM switch
2 x KVM cable
1 x Cable to upgrade the firmware
1 x Power adapter
1 x Assembly set to Racku
1 x User Guide