Tenda N30

Router Tenda N30 delivers advanced technology and high speed to the home. Supports 802.11n band 2.4 GHz Which allows to configure two antennas communication speeds up to 300 Mb/s . The high performance involved a fast processor and Broadcom QoS through which you can set the priority to individual services, ports or computers. Tenda N30 has only one LAN port and are suitable especially to homes and environments where computers are connected to the internet wirelessly .

The new chipset brings with it " Green Wi-Fi mode "That dynamically off-chip components, thus reducing the active power consumption. Tenda N30 placing emphasis on the easiest setting. Due to guides Czech language you install and configure WiFi router takes just a few minutes , The entire configuration interface including help also in English. Router has implementovánufunkci WDS Which link two or more AP enlarge a range of wireless networks. The security of your wireless network is used WPA2 encryption. Security simplifies the technology WPS With which to encrypt the network at the touch of a button. Wi-Fi standards: 802.11b/g/n

Wireless modes:
AP, Router, WDS Repeater, Wi-Fi router.

Frequency:
2.4 GHz

Wireless modes:
AP, Router, WDS Repeater, WISP

Modulation:
DSSS, OFDM

Channel Width:
20 MHz, 40 MHz

Output:
<20 dBm (EIRP)

Sensitivity:
-87 DBm @ 11 Mb/s, -72 dBm @ 54 Mb/s, -68 dBm @ 270 Mb/s

Security:
WPA-PSK, WPA2-PSK, MAC ACL, URL filtering

Method of control:
HTTP

Network functions:
UPnP, SNTP, virtual server, DMZ host, DHCP server/client, WDS, WPS

QoS:
802.11e WMM

Interface:
1x WAN, 1x LAN, the RESET/WPS

Antenna:
2x 5 dBi external, non-removable

Chipset:
Broadcom BCM5357

Design:
indoor, desktop

Housing material:
plast

Power:
9 V DC 1000 mA

Consumption:
8W

Cooling:
passive

Operating temperature:
0 ° to 40 ° C

Dimensions (HxWxD):
31 x 179 x 146 mm