Seagate Exos 10E2400 300GB 512n SAS

The Seagate Exos 10E2400 300GB 512n SAS hard drive is one of the high load internal HDDs for NAS systems. 2.5" HDDs are designed chiefly for laptops, small desktop PCs, and portable databanks. You can look forward to a total data capacity of 300 GB. The device features a 128 MB memory cache. The data transfer between the Seagate hard drive and a computer or other device takes place via the SAS interface.

Seagate Exos 10E2400 300GB 512n SAS HDD Key Features

• Read speed up to 215 MB/s and write speed up to 215 MB/s
• 128 MB memory cache
• Seagate 2.5" drive is compact and space-saving
• Typically, the power consumption of the hard drive is 6,3 W, while in stand-by mode it makes 3.09 W
• The data transfer is facilitated using the SAS interface
• Platter-based hard drives are more susceptible to physical damage, but it's also the most cost-effective storage solution available

Other HDD Features

The HDD boasts a unique design. Inside the enclosure there is a mechanism that utilises moving platters accompanied by hard disk heads that facilitate reading and writing of data. These moving parts are not particularly resistant against shock or impact, but on the upside, this design also delivers its amazing price/capacity ratio. The important parameter that determines the speed of a hard drive is the number of revolutions per minute (RPM). In case of the Seagate Exos 10E2400 300GB 512n SAS, you get 10000 RPM RPM. Data transmission and overall stability is also influenced the embedded buffer memory known as cache. The Seagate platter drive is equipped with a 128 MB cache that keeps the last written data for their speedy reading.

Connecting the Seagate Hard Disk

If you want to install the Seagate Exos 10E2400 300GB 512n SAS in the device of your choice, it requires a 2.5" slot. All data transfer is done through the SAS interface with a speed of 12.0 Gbit/s. This solution is not particularly widespread, however.