Tenda W150M

Travel Wireless Access Point supports the latest WiFi standard 80211n with transfer speeds up to 150 Mbit/sFair baud rate is about 90 Mbit/s, which is still 6 times more from the previous standard 802nd11 g with which the access point is backward compatible.The device can operate in several modes as a typical AP, Client + AP and wireless router.Handles special modes WDS and WISP that allow a combination of receiving and forwarding WiFi signal.Each of these modes can switch between them physically through a button on the side of the device.Reception and signal propagation provides internal omni-directional antenna with an output of 3 dBi.

The interface device has one RJ-45 port, the function (WAN/LAN) depends on the particular mode of use.The support of the strongest security WPA2 option to disable SSID broadcast, MAC address filter and packet filter.Content Filtering provides control access to inappropriate websites.Local or remote management is done through a web interface.The device is unique due to its compact size and Power over USB computer particularly suitable for travel, but also to small businesses and households to share Internet access via cable modem, DSL modem or Ethernet connections.

Specifications:

Operating modes:
Access Point
Client + AP
Wireless router
WDS + AP
WISP

Supported wireless network:
IEEE 80211b (11 Mbit/s, 2.4 GHz)
IEEE 80211g (54 Mbit/s, 2.4 GHz)
IEEE 80211n-lite (150 Mbit/s, 2.4 GHz)

Antenna:
Type: Internal
Power: 3 dBi

Output:
20 dBm

Sensitivity:
-92 DBm

Modulation:
DSSS, OFDM

Administration:
Through HTTP

Security:
WEP
WPA/WPA2

Interface:
1x RJ-45 (WAN/LAN)

Dimensions:
16 x 63 x 103 mm (H x W x D)

Weight:
350 g