Zalman R1

4.6 50 ratings
PC Case - midi tower, ATX, 2x 5.25", 4x 3.5", 1x 2.5", USB 3.0, 3x 120mm fan, fan controller, transparent side panel
Code:  CA069f2 Producer's Website:

Don't like the alternatives? Choose from the full product list

Zalman R1

The case, which provides enough space and cooling for high performance, has been designed for all PC enthusiasts. Behind the front door with a sound insulating material is a perforated chassis for an adequate distribution of cool air. A filter to prevent dust intake is also included. The tower is able to install up to five system fans, two of which can be replaced with a water-cooled radiator. Included are three fans to ensure that the cold air is sucked through the front part and is discharged to the upper rear part. In addition, the panel in the top part can be removed to ensure even greater airflow and the temperature inside the case can therefore be effectively reduced. You can even fix it with a powerful graphics card or a processor.

The SSD can be installed on a special place in the side wall. In addition, there are two 5.25" bays and four 3.5" bays for hard drives. Position for the resource is located in the lower part of the box and you can fit in the PSU source with a height of up to 200 mm. Gaming fans will surely enjoy the fact that a graphics card up to 360 mm fits inside the casing! The tower has a transparent side part, speed controller with 2 stages (+ complete shutdown), it has I / O ports for headphones, a microphone, two connectors for USB 2.0 and one for an advanced USB 3.0. So it fits perfectly in the surroundings of other electronics, for example, in your living room.

Specifications

Motherboard form factor
ATX, mATX (Micro ATX), mITX (Mini ITX)
Number of internal 3.5" slots
4×
Number of internal 2.5" slots
1×
External 5.25" position
2×

Internal structure

Motherboard form factor
ATX, mATX (Micro ATX), mITX (Mini ITX)
Number of internal 3.5" slots
4×
Number of internal 2.5" slots
1×

External structure

External 5.25" position
2×
Front panel location
top
Front panel connectors
3.5mm jack (headphones), 3.5mm jack (microphone), USB 2.0, USB 3.2 Gen 1
Sidewalls
Transparent
Additional equipment
Fan control, Front door, Perforated front, Supporting water cooling

PSU

Power supply
Without power supply

Cooling system

Number of fan positions
5×

Material

Wardrobe material
Steel

Dimensions

Width
192 mm (19.2 cm)
Height
465 mm (46.5 cm)
Depth
450 mm (45 cm)
Weight
4.9 kg
More Specifications
Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for Zalman R1

Related categories

Chcete doručit zboží do Česka? Prohlédněte si Zalman R1
Chcete doručiť tovar na Slovensko? Prezrite si Zalman R1
Für Versand nach Deutschland, besuchen Sie bitte Zalman R1