APC Easy-UPS 2200VA (Schuko)

The APC Easy-UPS 2200VA provides reliable power protection for computers, servers and network components, with a true power rating of 1200W and an apparent power rating of 2200VA. This line-interactive UPS uses automatic voltage regulation (AVR) technology, which intelligently corrects undervoltages and overvoltages within the 140–300V range without activating the battery. This preserves battery capacity for actual power outages and extends its lifespan. Thanks to its high operating efficiency of 97.1% at half load, this UPS for PCs reduces energy loss. This translates to lower running costs and reduced heat generation, contributing to a more stable environment for your electronics. The internal 24V lead-acid battery provides power and can be replaced by the user if needed. Comprehensive protection is rounded off by an integrated surge protector with an absorption capacity of 273J, which shields your devices from damage caused by voltage spikes. All four Schuko-type output sockets provide both battery backup and surge protection.

Performance and voltage stability

This UPS operates with a line-interactive topology that actively stabilises fluctuations in the mains electricity without switching to the battery. The integrated automatic voltage regulation (AVR) uses an internal transformer to correct both undervoltages and overvoltages to a safe level for connected devices. Efficiency at a half load of 600W reaches 97.1%, while at a full load of 1200W it only drops slightly to 95.8%. These figures mean lower electricity consumption and less waste heat generation, which reduces running costs and thermal stress on components. The output voltage, in the form of a stepped approximation to a sinewave, ensures full compatibility with the vast majority of modern switched-mode power supplies in computers and other electronics.

Backup and protection of the APC Easy-UPS 2200VA

During a power outage, power is supplied by a 24V lead-acid battery with a capacity of 9.0Ah. At a half load of 600W, it supplies power for 7.68 minutes, providing enough time to save work in progress and safely shut down your systems. At a full load of 1200W, the backup time is approximately 1.4 minutes. Recharging a completely discharged battery to full capacity typically takes 8 hours. The integrated surge protector, with an energy absorption of 273J, protects connected electronics. This feature absorbs dangerous voltage spikes from the mains, preventing damage to sensitive components in computers, monitors, or network storage devices. All four output sockets are equally protected.

Design and management

The UPS has a compact tower design with a footprint of 140×190mm and a height of 390mm, making it easy to place on the floor or directly on a desk. The weight of 12.2kg corresponds to its power output and battery capacity. The unit does not include a communication interface like a USB port, which simplifies installation to a plug-and-play process. Clear LED indicators on the front panel provide status information. The absence of software enables immediate use right after unpacking and plugging it in.

Operation, maintenance, connectivity and sockets of the UPS

The UPS ensures reliable operation in a standard office or home environment at temperatures from 0 to 40°C and relative humidity of 0–95% (non-condensing). The user can easily replace the 24V lead-acid battery, simplifying maintenance at the end of its life (typically 2–3 years) and extending the overall lifespan of the device without needing professional servicing. The operating noise level does not exceed 40dBA, which corresponds to a quiet environment and won't disturb you while you concentrate on your work. Certification according to CE and EN/IEC 62040 standards confirms the unit's safety and electromagnetic compatibility. It connects to the mains via a permanently installed 1.2-metre cable with a Schuko plug. The four Schuko-type output sockets provide full backup and protection for connected appliances.