DFI LanParty UT nF4-D - nForce4 DualCh DDR400, PCIe x16, SATA RAID FW GLAN 8ch audio sc939

DFI LanParty UT nF4-D - nForce4 DualCh DDR400, PCIe x16, SATA RAID FW GLAN 8ch audio sc939
The board is particularly suitable for demanding users and overclockery.It is very good with a large quantity of BIOS settings, good distribution of components and a large number of passive coolers to power mosfetech.It is equipped with a total of four power inputs ATX, ATX12V, one Molexem and floppy connector.In the lower right corner of the plate are two switches Power and Reset, which is suitable for those not used as a computer cabinet and the motherboard to be just put on the table.All yellow connectors, and slots are in the dark and UV light reflex, so it is suitable as a stylish complement to your PC.
The parameters and specifications:
CPU:
Socket 939, AMD Athlon 64 FX / Athlon 64 / Sempron
Promoting technology Cool 'n' Quiet
Hypertransport 1000 MHz FSB
Čipset:
NVIDIA nForce4
Memories:
Dual controller
4 slots for up to4 GB DDR 400/333/266 MHz
Controllers discs:
2 x ATA-133, Raid 0, 1, 0 +1 (max4 devices)
4 x Serial-ATA150, nVRaid 0, 1, 0 +1 (max4 devices)
Network card:
Vitesse VSC8201 Gigabit Phy
Audio:
Karajan module
Realtek ALC850 8-channel audio codec
Extension slots:
2 x PCI Express x16
1 x PCI Express x1
1 x PCI Express x4
2 x PCI
Inputs and outputs:
1 x AUX, CD-in
1 x FireWire (next to the header)
1 x Line-in, Line-out, Microphone
2 x PS / 2
1 x RJ-45
1 x S / PDIF in / out
6 x USB 2nd0 (4 more on the header)
1 x serial port
Dimensions:
305 x 240 mm ATX
BIOS Setup:
Options frequency:
CPU:200 to 456 MHz after 1 MHz
PCI-E:100 to 145 MHz after 1 MHz
Multiplier:
DRAM:FSB:1:2, 3:5, 2:3, 7:10, 3:4, 5:6, 9:10, 1:1
HT:FSB:1:1, 15:1, 2:1, 25:1, 3:1, 4:1, 5:1
Voltage:
CPU:0.8 to 1.55 in after the 0.025
DDR:2.5 to 4.0 after the 0.1 V
HT:1.2 to 1.5 after the 0.1 V
Smart Set:1.5 to 1.8 after the 0.1 V
Specifications can be changed without notice. Images are for illustrative purposes only.

