Zalman CNPS9300 AT
Don't like the alternatives? Choose from the full product list
Zalman CNPS9300 AT
Discontinued
Zalman CNPS9300 AT
0 cm 0 cm 0pt "> unique and highly efficient copper radiator designed for all modern processors from AMD and Intel.It consists of thin slices and they are the large cooling area 2583 square centimeters for heat removal.This structure is further complemented by two heatpipes that because of the special shaping paying twice more heat than is normal for other coolers with this technology.Using an outstanding 92 mm fan is guaranteed the lowest possible noise, which ranges from 20 to 30 db.Automatic speed ranging from 1500 to 2400 RPM is provided motherboard PWM technology through 4-pin connector.The packages are all necessary components for installation on supported basic types of boards, including teplovodivé paste.The radiator is one of its dimensions to the middle class and they are here and in smaller boxes, where the larger models to seek its place is difficult.Kompatibilitu with your cabinets can be verified very easily, the distance between the motherboard and bočnicí boxes should be greater than 145 mm.
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature at which steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.normal "> parameters and specifications:normal "> Dimensions:
Cooler:61 x 108 x 132.5 mm
Fan:92 mm
Speed:
1500 - 2400 rev./ min.± 10%
normal "> Noise:
20 to 30 db ± 10%
normal "> Material:
Copper
normal "> Electric:
Power:12 volts, 4 pin connector
normal "> Weight:
407 g
normal "> Supported slot:
Intelyes "> - Socket 775
AMD - Socket 754 / 939 / 940 / AM2 / AM2 +
Heatpipe technology is based on the principle of closed-tube, which in its "warm" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "cold" end, where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature at which steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.normal "> parameters and specifications:normal "> Dimensions:
Cooler:61 x 108 x 132.5 mm
Fan:92 mm
Speed:
1500 - 2400 rev./ min.± 10%
normal "> Noise:
20 to 30 db ± 10%
normal "> Material:
Copper
normal "> Electric:
Power:12 volts, 4 pin connector
normal "> Weight:
407 g
normal "> Supported slot:
Intelyes "> - Socket 775
AMD - Socket 754 / 939 / 940 / AM2 / AM2 +
Note:
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
