Fenix E20 V2.0
Fenix E20 V2.0
The latest generation of the Fenix E20 V2.0 LED flashlight offers a high light output of up to 350 lumens (ANSI) and a range of up to 126 meters. This version offers simple operation and four levels of light output with an operating time of up to 200 hours. The control and switching is done with the end button. It uses two commonly available pencil batteries for power, of course disposable and rechargeable batteries can be used. A unique innovation is a special collimator that creates a light cone with a range of 126 meters. The collimator is made with technology used in the automotive industry and its height is only 3 millimeters, less than half that of commonly used optics. With a length of just 127 millimetres and a weight of 42 grams (without batteries), it can be carried with you at all times. This Fenix E20 V2.0 flashlight is an ideal light tool with an excellent ratio of high performance, quality and price.
350 lm
Light flux
126 m
Maximum range
2 pencil batteries
Power source
Type T6 aerospace hardened aluminium
Material
Key features of the Fenix E20 V2.0 flashlight
- Modern LED Luminus SST-20 with 50 000 hours lifetime
- Uses two pencil batteries (AA type - alkaline, lithium or rechargeable NiMH)
- Energizer L91 Ultimate Lithium batteries (especially suitable for extreme conditions and expeditions) provide the longest battery life
- Protection against accidental insertion of the battery in reverse (reverse polarity)
- Intelligent overheating protection
- Electronics with digital constant power control and reverse battery protection
- Made of aircraft hardened aluminium type T6
- The flashlight is shockproof against falls from a height of 1 meter
- Durable Type III hard anodized surface
- Distinctive surface grooves for better grip
- Fixed clip for safe and easy carrying of the flashlight (removable)
- Special super-thin collimator only 3 mm high, made with technology used in the auto industry
Using the Fenix E20 V2.0 flashlight
To turn on the Fenix E20 V2.0 flashlight, press the switch located at the end of the flashlight. The torch always switches on in the lowest mode. With the torch on, you can change the power modes at any time by pressing the button (cycles through low - medium - high - turbo).
Fenix E20 V2.0 flashlight with intelligent overheat protection
If the temperature of the Fenix E20 V2.0 rises above 58°C, the flashlight will automatically start to reduce power in gradual steps of 1% every second until the power is reduced to 150 lumens. Once the temperature of the lamp drops below 58°C, the power will automatically increase to the original level again. Thus, operation at the highest power mode is not limited by time, but only by temperature.
Battery status information
If the battery voltage drops below the set level, the Fenix E20 V2.0 automatically reduces power. When the batteries are low, only the lowest power mode will be available.
Additional information
- Max endurance up to 200 hours
- High luminous flux up to 350 lumens (ANSI)
- Range up to 126 metres
- Four levels of light output
- Length just 127 millimetres
- Weight 42 g
Accessories
- Wrist lanyard
- Spare o-ring
- Two alkaline batteries
Light flux
It is specified in Lumens (lm) and the higher the value, the more intensely the headlamp shines. Some LED headlamps offer multiple levels of light intensity, adjustable either in steps or continuously. However, the higher luminous flux shortens the endurance.Up to 100 lm - headlamp for home use (lighting in the basement, in the attic, when repairing the car).
100 - 400 lm - outdoor use (night running, cycling, camping).
Above 400 lm - extreme occupations and sports (rescue workers, climbers).
Specifications
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
Packaging
Type
Features
Power supply
Waterproof
Special features
Dimensions
Colour
Packaging
ARIGA s.r.o., Holečkova 2282/76, 150 00 Praha 5, Česká republika, +420 734 793 444, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
