
The AL-KO DIVE 6500/34 submersible pressure pump is equipped with a three-stage drive and a 1,000W motor. It can operate at a submersion depth of up to 7 metres and provides a head of up to 34 metres. The maximum flow rate is 6,500 litres per hour, maintaining a stable pressure and high flow. It weighs approximately 11kg and is equipped with a 10m power cable. The integrated handle allows for both stationary and mobile use. The pump body, filter screen, and shaft are all made of non-corrosive stainless steel, which guarantees easy maintenance. Three additional lip seals prevent water from entering the motor. The pump is designed to operate in a lying position, and the specially shaped handle prevents it from unintentionally turning over.

Automatic start and stop is enabled by an electronic pressure switch. The float switch serves as additional protection against dry running. A 1.5" diameter hose can be attached to the outlet, and it also has a one-inch connection for fitting a floating suction unit, which is used to draw clean water from the upper part of the tank. The pump allows for the operation of multiple irrigation systems and has an outlet for a high flow rate. The AL-KO DIVE 6500/34 pump can handle impurities with a grain diameter of up to 0.5mm and is intended exclusively for service water or chlorinated pool water up to a temperature of 35°C.
AL-KO KOBER spol. s r.o., Táborská 2134, 39701 Písek, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.