PoE-PAN16

This professional panel has 16 passive integrated PoE injectors and is therefore suitable for powering up to 12 devices with an integrated PoE extractor. This is a great solution for powering wireless devices, IP phones, IP cameras, and more. If the powered device does not have a PoE extractor, it can be combined with a passive PoE splitter.

On one side, ethernet ports are connected to the RJ45 connectors, for example from switches (without power supply). On the other side (PoE side), you connect UTP cables which lead to the target devices which are powered by the cables at the same time. Two unused pairs of ethernet cables are used for power. Power is delivered in pairs of 4.5 (+) and 7.8 (-).

Parameters and Specifications:

Properties:
19" rack mount version
LED for visual traffic monitoring
External grounding element for overflow filtering at the back of the panel
Retrofit protection against overcurrent (OCP protection 650mA) on each port
Input for power connector (2.5mm center center jack, 1 piece included)

The power supply is not a part of the package; its choice and power parameters must be optimized according to the respective drain of powered devices and their configurations.
Input for the power connector via a standard 2.1mm socket or power terminal (grounding element - zero)

Specifications:
Standards: TIA/EIA 568 Cat.5
Conformity: CE
LAN port: 16x RJ45, 16x RJ45 POE 10/100Mbps
Power: Input for 2.5/5.5mm jack
Dimensions: 482.6 x 44.3 x 21.8mm
LED indication
Output voltage: according to the adapter used
Input voltage: 0-48V, 4A