POE-PAN8-GB

The unique POE-PAN8-GB panel can power 8 passive PoE devices through passive PoE injectors. It is a cost-effective solution for remote PoE powering of wireless devices, IP phones, IP cameras etc. With this panel, there is no need to buy new expensive PoE switches or multiple individual injectors. If the powered device does not have a POE extractor, it can be combined with a passive POE splitter. This version boasts support for up to 1Gbps bitrate over Gigabit Ethernet.

Key Features of the POE-PAN8-GB

• Bulk, economical PoE power supply
• SUpports up to 8 PoE devices
• Supports Gigabit Ethernet and passive PoE
• Power Supply not included (buy according to the required specification)

Gigabit PoE PoE-PAN8-GB PoE Injector with Easy Installation

The device is not complicated to set up. The main part of the installation consists of connecting the cables. Just connect the existing network to the Ethernet ports on the one side of the POE-PAN8-GB, and on the other, connect the cables to the devices that require PoE for simultaneous data and power transmission. The POE-PAN8-GB uses a standard 2.1mm jack or panel connector with a terminal block for power.

Parameters and Specifications:

Interface:
8 × RJ-45 shielded input (data)
8 × RJ-45 shielded output (data + power supply)

Input:
12 - 57V DC 2,1mm/Phoenix DC connector

Output:
12 - 57V (max. 1A per port)

Ethernet:
TIA/EIA 568 Cat. 5

Dimensions:
60 × 180 × 25mm

Weight:
160g