LocoBracket

' Holder LocoBracket, which is designed for NanoStation Loco 2/5.Thanks articulated design you can very easily and in any direction to steer to the AP.Holder is a versatile, you can install the console, pole or wall.

Technical parameters and specifications:

Installing the bracket on the bracket or mast:
1stInsert U-bolt though mast and console and insert the part LocoBracket with bracket joint.
2ndSlip on the U-bolt own Nanostation Loco already fitted body LocoBracketu.
3rdAll attract mothers under the insert pad.
4thPoint Nanostation Loco in the desired direction and tighten the mother to stop.

Installing the bracket on the wall:
1stM6 insert screws into the prepared holes in the castle LocoBracketu articulated bracket.
2ndInsert the wall plugs and place with bolts of an articulating bracket.
3rdSlip on the bolts Nanostation Loco was fitted with the body LocoBracketu.
4thAll attract mothers under the insert pad.
5thPoint Nanostation Loco in the desired direction and tighten the mother to stop.