MSI K8D MASTER3-FS (MS-9131 v2.0) AMD 8131 12xDDR400 SCSI RAID dual sc940

Dual motherboard for two AMD Opteron processors with a cap based on Socket 940 AMD čipsetu 8131 and designed for medium-performance servers.The board is an integrated video card ATI Rage XL with 8 megabytes of RAM and a network card gigabitová Broadcom BCM5704C (connected to the PCI-X bus), which supports two ports.

Expanding allow three PCI-X slots and two classic 32-bit PCI slots.Two USB ports are led out on the back of the board, two more may be out of the header on the motherboard.To connect hard drives are two Ultra DMA 133/100/66/33 channels and SCSI controller Adaptec AIC-7901 Ultra-320.

The parameters and specifications:

Applicable processors:
2 x Socket 940 for AMD Opteron processors 100 and 200 series
Support for Opteron EE / HE
Support for AMD x86-64 Technology

Čipset:
AMD 8131
AMD 8111

The system bus:
up to 800 MHz HyperTransport

RAM:
Slots:12 slots for the 144-bit DDR memory modules 200/266/333/400 (DDR 400 can only be used in the installation 2nd Opteron 246 and higher)
Configuration:4 bank after 2 paticích for the first and 2 bank after 2 paticích for the second processor
Suitable type of memory:Only modules ECC Registered
Capacity:Each module 128 MB to 2 GB
The maximum amount of memory:up to 24 GB DDR 200/266/333, or up to 8 GB DDR 400 (both with two processors)
ECC error correction:routine, to 4 bits
Dual channel:two identical memory modules into a single bank
Memory modules must be osazovat in pairs!
We recommend memory/ / www.alzasoft.com / SearchAdvanced.asp?parSort = & EXPSOld = ECC% 81registered & TypeSearchOld = 12 & EXPS = & NameSearch = 1 & CodeSearch = 1 & ProducerSearch = 1459 & CatSearch = 18842855 & x = 13 & y = 6 "> Kingston for their excellent reliability and perfect compatibility.Information on Kingston memory modules appropriate for the board, see/ / www.ec.yogi.com / ecom / configurator / modelsinfo.asp?SysID = 18395 & mfr = MSI K8D & model = + Master3 & Sys = 18395-MSI-K8D + Master3-FS% 2FK8D + Master3-FSM% 2FK8D + Master3-FA4R% 2FK8D + Master3-FA4RM & distributor = 0 & submit1 = Search "> here.

Extension slots:
1st PCI-X 133
2nd PCI-X 66/100
1st PCI-32

Integrated video card:
ATI Rage XL 8 MB

Controllers discs:
2x Ultra DMA 133/100/66/33 (max4 devices)
1st SCSI controller Adaptec AIC-7901 Ultra-320

Integrated network card:
Broadcom BCM5704C
1000 Mbit / s

Connectors on the rear panel:
1st parallel
1x serial
1st PS / 2 keyboard
1st PS / 2 mouse
1x VGA
2x USB (the possibility of adding a further two to bracketu)
2nd RJ-45

Bios:
4 Mbit Flash EEPROM
PCI 2nd2 compliant, VPD, and DMI
PnP 1st0A, SMBIOS 2nd3, ACPI 1st0A, 20
Support for PXE boot Protocol
APM 1st2, WOL
PC2001

Power:
ATX or SSI
Connectors:1st ATX / SSI 20/24 pins, 1x ATX12V/SSI 4 / 8 pins
For the correct functionality is necessary server cabinet with a good source!Enforcement resources should be at least 425 W.

The size of plates:
305 x 330 mm SSI EEB 3rd0