Power Supply SEASONIC M12D-850
Don't like the alternatives? Choose from the full product list
Power Supply SEASONIC M12D-850
Discontinued
Power Supply SEASONIC M12D-850
Peak power supply with 850 W output and high efficiency in excess of 80%.A specialty of resources compared to the earlier S12 series are removable cables.They need not have involved all the connectors, but only those necessary.The advantage is not only in order computer cabinet, but mainly better air circulation.The cooling and air circulation are old and very quiet 120 mm fan made of black plastic, which also contributes to the cooling of the system.The high quality of the witness box resources, which are made of sheet strength 0.8 mm and almost the entire back wall surface resources are used for the passage of air.
Very high quality cabling is also visible, which is classically withdrawn tightening belt and it is twisted.Extra amount of power connector and worthy length of each cable sufficient to fully equipped with numerous computer disks and drives.A PFC meet standards of low harmonic interference and re-emit the network, necessary for the operation in the EU.
Parameters and specifications:
Format:ATX 12V v2.2 (can be used for ATX motherboard)
Performance:850 W
Effectiveness:more than 80% (at full load)
Entry:100 - 240 V
Fan:120 x 120 mm, ball bearings, controllable temperature
PFC correction circuit:Active
Other features:Power Switch, detachable cables
MTBF:> 150 000 hours at 25 ° C
Dimensions:
150 x 160 x 86 mm
Connectors:
1 x 20 + 4 pins ATX 2nd2
1 x 4-pin ATX 12 V
1 x 8-pin ESP 12
8 x Molex 4-pin
2 x FDD connector
11 x Serial ATA HDD
4 x 6-pin PCI Express
Maximum Power consumption:
3.3 V:24 A
+5 V:30 A
12 V1:40 A
12 V2:40 A
-12 V:0,8 A
5 Vsb:3 A
Very high quality cabling is also visible, which is classically withdrawn tightening belt and it is twisted.Extra amount of power connector and worthy length of each cable sufficient to fully equipped with numerous computer disks and drives.A PFC meet standards of low harmonic interference and re-emit the network, necessary for the operation in the EU.
Parameters and specifications:
Format:ATX 12V v2.2 (can be used for ATX motherboard)
Performance:850 W
Effectiveness:more than 80% (at full load)
Entry:100 - 240 V
Fan:120 x 120 mm, ball bearings, controllable temperature
PFC correction circuit:Active
Other features:Power Switch, detachable cables
MTBF:> 150 000 hours at 25 ° C
Dimensions:
150 x 160 x 86 mm
Connectors:
1 x 20 + 4 pins ATX 2nd2
1 x 4-pin ATX 12 V
1 x 8-pin ESP 12
8 x Molex 4-pin
2 x FDD connector
11 x Serial ATA HDD
4 x 6-pin PCI Express
Maximum Power consumption:
3.3 V:24 A
+5 V:30 A
12 V1:40 A
12 V2:40 A
-12 V:0,8 A
5 Vsb:3 A
Specifications
Sea Sonic Europe BV, Rietveld 7, 5258 ED Berlicum, Netherlands [email protected]
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
